LHD Electric Power Steering Rack for Range Rover L405 2014-2016 OE# LR091404 GK52-3200-AB
LHD Electric Power Steering Rack for Range Rover L405 2014-2016 OE# LR091404 GK52-3200-AB
Couldn't load pickup availability
Low stock: 10 left
Remanufactured Electric Power Steering Rack and Pinion for Range Rover Vogue & LWB (OE# LR091404 / GK52 Series)
This premium remanufactured electric power steering rack and pinion for Land Rover (L405 Chassis Range Rover Vogue & Long Wheelbase / LWB Models) directly replaces OE# LR091404 and all interchangeable official part numbers listed below. Built strictly to OEM specifications and 100% bench-tested before shipment — restores factory steering precision and responsiveness at a fraction of dealership cost. No core charge required.
| Parameter | Specification |
|---|---|
| Primary OE Part Number | LR091404 |
| Driving Position | Left-Hand Drive (LHD) Only |
| Chassis / Platform | Land Rover L405 Chassis (GK52 System / Early CAN-bus) |
| Steering Technology | Standard Electric Power Steering (EPS) Rack Assembly |
| Drive Type | Fits Four-Wheel Drive (4WD / AWD) Models |
Product Condition & Quality Assurance
Remanufactured (Premium Rebuilt) — Solves critical steering hesitation, stiffness, intermittent power loss, and abnormal grinding noises. This electric power steering rack assembly is rebuilt strictly to OEM standards. It addresses common torque sensor alignment failures and internal module water ingress issues prevalent in early-gen Range Rover Vogue L405 models.
OE Part Number Reference & Compatibility Dictionary
👉 Please verify your original OEM number or provide your VIN before ordering.
Primary Cataloged OE Part No: LR091404
100% Direct Official JLR Replacement Part Numbers:
LR072409, LR143417
⚠️ CRITICAL MATCH — GK52 Engineering Stamped Housing Numbers:
This steering rack belongs to the early JLR engineering prefix generation. It interchanges seamlessly with the following specific part numbers stamped directly on the original aluminum housing:
• GK52-3200-AA • GK52-3200-AB • GK52-3200-AC
• GK52-3200-AD • GK52-3200-AE • GK52-3200-AF
• GK52-3200-AG
🚨 INCOMPATIBILITY NOTICE: Engineered exclusively for the listed L405 GK52 architecture. It does NOT replace later mid-generation or facelift units (such as GK62, HPLA, or LPLA series) due to completely different gateway communication networks. Full module programming and calibration via JLR SDD software are required upon fitting.
Vehicle Fitment Guide (LHD Only)
Fits Land Rover L405 (Range Rover Vogue & Long Wheelbase / LWB) Models with Matching OE Numbers — 2014–2016.
Compatible Engine & Trim Variations:
- Range Rover Vogue 3.0T V6 (Gasoline Supercharged): Vogue Standard / Vogue LWB (Long Wheelbase) / Vogue SE LWB / Autobiography LWB (Engine: 306PS) — 2015-2016
- Range Rover Vogue 3.0T V6 (Diesel Twin-Turbo): Vogue / Vogue SE / Vogue SE LWB (Engine: 306DT) — 2014-2015
- Range Rover Vogue 5.0T V8 (Gasoline Supercharged): Autobiography LWB / SV Coupe / SV Autobiography (Engine: 508PS) — 2015
- Range Rover Vogue 3.0T Black Edition (Gasoline Supercharged): (Engine: 306PS) — 2015
Core Product Features
🔧 ECU Coding Required: Features an integrated control module. Requires factory online programming, CCF synchronization, and steering angle sensor calibration via JLR SDD software or premium diagnostic systems.
⚙️ Precision Rebuild: Outfitted with new high-precision bearings, heavy-duty sealing rings, and OEM-spec extreme-pressure grease. Lash and preload are calibrated to original factory tolerances.
🛡️ 24-Month Warranty: Save up to 70% vs. Dealership pricing with an industry-leading warranty. Plug in, code, and drive.
Frequently Asked Questions
Q: My original part number is LR072409 or stamped GK52-3200-AF. Will this item fit?
A: Yes, absolutely. Both are direct interchangeable engineering and service numbers with LR091404. It will physically fit and communicate flawlessly once properly coded.
Q: Does this fit RHD (UK/Australia) cars?
A: No. This unit is strictly for Left-Hand Drive (LHD) configurations.
Global Expedited Shipping
• USA, Europe, Asia, Australia, NZ, Mexico: Typically 5–8 business days.
• Other Regions / Remote Areas: Usually 8–15 business days (Customs dependent).
• Import Clearance: Import duties, value-added taxes (VAT), and regional customs clearance charges are not included in the item price or baseline shipping cost. These fees are the buyer's sole legal responsibility. Please verify with your country's customs department to determine these additional import costs prior to confirming your purchase.
• Customized Documentation & Valuation: If your workshop requires specific commercial invoice documentation, specialized valuation arrangements, or customized invoicing to facilitate a smoother customs transition in your region, please contact our sales team directly prior to dispatch. We are fully prepared to accommodate your specific business setup.
• Delivery Protection: We use priority tracked services (UPS/DHL/FedEx). If you have not received official tracking updates or delivery within 20 days post-payment, please alert us immediately. Our logistics team will instantly initiate a priority cargo trace to resolve it—your 100% satisfaction is our top priority!
