LHD Electric Power Steering Rack and Pinion for JAGUAR F-PACE (X761), RANGE ROVER VELAR (L560) 2016- OE# T4A12198
LHD Electric Power Steering Rack and Pinion for JAGUAR F-PACE (X761), RANGE ROVER VELAR (L560) 2016- OE# T4A12198
Couldn't load pickup availability
Low stock: 10 left
Remanufactured Electric Power Steering Rack and Pinion for Jaguar F-PACE & Land Rover Range Rover Velar (OE# T4A12198)
This premium remanufactured electric power steering rack and pinion for Jaguar Land Rover (JLR iQ Platform, 2015–2020) directly replaces OE# T4A12198 and all interchangeable part numbers listed below. Built strictly to OEM specifications and 100% bench-tested before shipment — restores factory steering precision and responsiveness at a fraction of dealership cost. No core charge required.
| Parameter | Specification |
|---|---|
| Primary OE Part Number | T4A12198 |
| Driving Position | Left-Hand Drive (LHD) Only |
| Chassis / Platform | JLR iQ Aluminum Platform (Early Generation / EVA 1.0) |
| Dynamic Steering Configuration | Standard Electric Power Steering (EPS) Assembly |
| Drive Type | Fits Both All-Wheel Drive (AWD) & Rear-Wheel Drive (RWD) Variants |
Product Condition
Remanufactured (Premium Rebuilt) — Fixes steering hesitation, stiffness, intermittent power loss, and abnormal grinding noise. This electromechanical power steering rack assembly is rebuilt strictly to OEM specifications and 100% bench-tested for like-new performance, response, and long-term reliability. Perfect solution for common Jaguar X761 and Land Rover L560 early-year electric steering module failure and internal torque sensor alignment issues.
OE Part Number Reference
👉 Please verify your original OEM number or provide your VIN before clicking Add to Cart.
Primary OE Part No: T4A12198 (Early Main Production Part)
Direct Interchangeable / Superseded OE Numbers:
T4A13857, T4A30055, T4A11210, T4A32210, LR090868, LR100085, LR111843, LR117547, LR130095
⚠️ CRITICAL MATCH — Cross-Reference Engineering Stamped Numbers:
If your original factory steering rack has any of the following specific engineering reference codes stamped directly on the aluminum housing or control module label, this unit is the 100% correct cataloged replacement:
FK83 Series (2015-2017 Early Production):
• FK83-3200-AF, FK83-3200-AG, FK83-3200-AH, FK83-3200-AJ
HK83 Series (2017-2019 Mid Production):
• HK83-3200-AA, HK83-3200-AB, HK83-3200-AC, HK83-3200-AD, HK83-3200-AE
KK83 Series (2019-2020 Transition Phase):
• KK83-3200-AA, KK83-3200-AB, KK83-3200-AC
Technical Note on Later Versions (e.g., LR141681 / M83 / N83): LR141681 belongs to the late-facelift generation (EVA 2.0 architecture, usually prefix M83 / N83). This T4A12198 is the correct unit for early-generation vehicles. Do not cross-mix across electrical generations without verifying the official JLR supersession chain via VIN.
Vehicle Fitment Guide
• Driving Position: Left-Hand Drive (LHD) Only
• Market Scope: Global LHD Markets (USA, Europe, China, Middle East, etc.)
• Chassis: Jaguar X761 & Range Rover L560 Platforms — Fits models up to vehicle VIN sequence split (Early production phase).
Compatible Models:
Jaguar F-PACE / F-PACE S / R-Sport (X761 Platform):
• Jaguar F-PACE 2.0L L4 Diesel / Gas LHD — 2017–2020
• Jaguar F-PACE 3.0L V6 Supercharged LHD — 2017–2020
Land Rover Range Rover Velar (L560 Platform):
• Range Rover Velar 2.0L P250 / D180 LHD — 2018–2020
• Range Rover Velar 3.0L P380 Supercharged LHD — 2018–2020
Core Product Features
🔧 ECU Coding Required After Installation: This electromechanical steering rack features an integrated control module. It requires factory online programming, vehicle configuration file (CCF) synchronization, and steering angle sensor calibration after fitting. Ensure your technician has access to JLR SDD, Pathfinder, or high-end diagnostic gear (Autel Maxisys / Topdon). Software programming is the installer's responsibility.
⚙️ Precision Mechanical Rebuild: Outfitted with new high-precision internal bearings, premium heavy-duty sealing rings, and OEM-spec extreme-pressure steering grease. Rack-and-pinion lash and preload are calibrated precisely to original factory tolerances to eliminate loose steering, vibration, or wandering at highway speeds.
📊 100% Bench-Tested: Every single unit undergoes rigorous simulated load testing, no-load current curve verification, and internal digital torque sensor alignment before leaving the facility. Hardware is guaranteed sound — plug in, code, and drive.
🛡️ Save Up to 70% vs. Dealership Pricing — 24-Month Warranty Included. No core charge. No deposit. Just a direct bolt-on premium replacement backed by an industry-leading warranty.
Frequently Asked Questions
Q: My old steering rack casing has the engineering number HK83-3200-AD, HK83-3C510-AB, or similar stamped on it. Will this fit?
A: Yes, absolutely. FK83, HK83, and KK83 (including specific sub-versions like HK83-3200-AD) are JLR factory assembly-line engineering prefixes and suffixes stamped into the metal body. This cataloged T4A12198 steering rack is the exact official replacement part designed to match and replace those specific stamped numbers.
Q: Do I need to ship my old broken steering rack back to you?
A: No core charge is required for this product. You can keep or dispose of your original core — no return shipping deposit needed.
Q: Will this fit Right-Hand Drive (RHD) vehicles in the UK, Australia, or South Africa?
A: No — this unit is engineered exclusively for Left-Hand Drive (LHD) steering configurations.
Q: Can an independent workshop install this, or do I have to go to a JLR dealer?
A: Any specialized independent shop equipped with JLR Pathfinder/SDD software or advanced aftermarket diagnostic tablets can perform the module flashing, steering adaptation, and coding. A main dealer visit is not strictly required.
Global Expedited Shipping
Ships via UPS, DHL, or FedEx expedited networks — fully tracked, safely crated, and insured directly to your workshop door.
• USA, Europe, Asia, Australia, NZ, Mexico: 5–8 business days
• Other Regions / Remote Areas: 8–15 business days
⚠️ International Buyers: Import duties, local VAT, and customs clearance fees are not included in the item price and remain the buyer's sole responsibility. Please consult your local customs authority before placing your order.
